Filter
Top Products
45
Getting started
Adjusting
Seat fore and aft adjustment
̈ Press the switch forward or backward
in direction of arrow 5.
Seat height
̈ Press the switch up or down in
direction of arrow 3.
Seat cushion tilt
̈ Press the switch up or down in
direction of arrow 2 until your upper
legs are lightly supported.
Seat backrest tilt
̈ Press the switch forward or backward
in direction of arrow 4.
Head restraint height
Vehicles with memory function*:
̈ Press switch 1 (୴ page 44) up or
down in direction of arrow.
Vehicles without memory function*:
1 Head restraint
2 Release button
i
The memory function* (୴ page 133) lets
you store the settings for the seat positions
together with the settings for the steering wheel
and the exterior rear view mirrors.
Warning! G
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the
occupant adjust the head restraint properly.
For your protection, drive only with properly
positioned and engaged head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
!
Do not attempt to remove front seat head
restraints. They can only be removed by qualified
technicians. We recommend that you have this
work carried out by an authorized
Mercedes-Benz Light Truck Center.