Filter
Top Products
434
Practical hints
Replacing bulbs
̈ Align housing cover 4 and turn it
clockwise.
Front turn signal lamp bulb
1 Mark
2 Handle
3 Bulb socket
̈ Turn bulb socket 3 with handle 2
counterclockwise and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket 3.
̈ Press the new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp. Handle 2 must be in a horizon-
tal line and mark 1 is on the upper
part.
̈ Turn bulb socket 3 clockwise until it
engage.
Parking and standing lamp bulb
̈ Turn housing cover 2 or 3 counter-
clockwise and remove it.
̈ Pull out bulb socket 6 with the bulb.
̈ Pull the bulb out of the bulb socket 6.
̈ Press the new bulb into bulb socket 6.
̈ Press bulb socket 6 back into the
lamp.
̈ Align housing cover 2 or 3 and turn
it clockwise.
Front lamps Bi-Xenon*-type
Warning! G
Do not remove the cover 5 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
୴୴