Filter
Top Products
169
Controls in detail
Control system
Showing or hiding additional
speedometer (vehicles with manual
transmission)
You can have an additional digital speed-
ometer shown on the multifunction dis-
play. The speed is shown in the unit of
kilometers/hour (USA) or miles/hour
(Canada).
̈ Press % or $ to select the
Instr. Cluster
submenu.
̈ Press #.
̈ Press % or $ to select the
Addi-
tional Speedometer
function.
̈ Press #.
The current setting is shown.
̈ Press # again if you would like to
change the current status.
Depending on the previous status, the
additional speedometer will be
switched
On
or
Off
.
Permanent display (vehicles with auto-
matic transmission*)
You can use the
Permanent Display
func-
tion to choose to display either the outside
temperature or the speed in kilometers
(USA) or miles (Canada) permanently.
̈ Press % or $ to select the
Instr. Cluster
submenu.
̈ Press #.
̈ Press % or $ to select the
Per-
manent Display
function.
̈ Press #.
The current setting
Outside tempera-
ture
or
Speedometer (km/h)
(USA)/
Speedometer (miles)
(Canada)
is shown.
̈ Press # again if you would like to
change the current status.
Depending on the previous status, the
Permanent Display
will be switched
between
Outside temperature
or
Speedometer (km/h)
(USA)/
Speedome-
ter (miles)
(Canada).
The selected display is then shown
continuously in the lower display.