Filter
Top Products
263
Controls in detail
3-zone automatic climate control* (Canada only)
Adjusting air distribution
Use right a and/or left e button Z
(
୴ page 259) to adjust the air distribution
manually for each side of the passenger
compartment. The following symbols are
shown in display d:
̈ Press buttons Z (୴ page 259) re-
peatedly until you have select the de-
sired setting and the corresponding
symbol is shown in display d.
The indicator lamp in button U goes
out. The automatic air distribution is
switched off. The air distribution is
controlled according to the selected
control setting.
Adjusting air volume
Use button U (
୴ page 259) for auto-
matic mode or button · (
୴ page 259)
or Q (
୴ page 259) to adjust air volume
manually.
Seven blower speeds are available for each
side of the passenger compartment.
̈ Press button · to decrease, or
button Q to increase air volume to
the desired level.
The indicator lamp in button U
(
୴ page 259) goes out.
The air volume is adjusted correspond-
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
Using driver-side settings for all tem-
perature zones
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
̈ Press button z (୴ page 259).
The indicator lamp in the button comes
on.
The driver-side settings are used for all
temperature zones.
Symbol Function
{ Directs air to the windshield
and the side defroster vents
a Directs air through the center,
side and rear passenger
compartment air vents
Y Directs air to the footwells
i
You can also select a position between two
symbols with button Z.