Filter
Top Products
293
Controls in detail
Useful features
̈ Tap the front of the cover plate 1.
The cover will retract and the ashtray
will close.
Power outlet in the glove box
1 Power outlet
̈ Switch on the ignition.
̈ Open the glove box (୴ page 284).
̈ Flip cover from power outlet 1 to the
right and insert electrical plug (ciga-
rette lighter type).
Power outlet in the rear passenger
compartment
1 Power outlet
2 Cover
̈ Switch on the ignition.
̈ Pull at top of cover 2.
̈ Flip cover from power outlet 1 to the
left and insert electrical plug (cigarette
lighter type).
!
The lighter socket can accommodate 12V
DC electrical accessories (up to a maximum of
85 W) designed for use with the standard “ciga-
rette lighter” plug type. Keep in mind, however,
that connecting accessories to the lighter socket
(for example extensive connecting and discon-
necting, or using plugs that do not fit properly)
can damage the lighter socket. With the socket
damaged, the lighter may no longer be able to be
placed in the heating (pushed-in) position, or the
lighter may pop out too early with the lighter not
hot enough.
To help avoid damaging the cigarette lighter
socket, we recommend connecting 12V DC elec-
trical accessories designed for use with the stan-
dard “cigarette lighter” plug type to the 12V
power outlet (
୴ page 293) in your vehicle when-
ever possible.
i
The power outlet 1 can be used to
accommodate electrical consumers (e.g. air
pump, auxiliary lamps) up to a maximum
of 180 W.
i
The power outlet 1 can be used to
accommodate electrical consumers (e.g. air
pump, auxiliary lamps) up to a maximum
of 180 W.