Filter
Top Products
472
Practical hints
Replacing bulbs
̈ Turn bulb socket 5 clockwise until it
engages.
̈ Insert corner-illuminating front fog
lamp 1 back into bumper.
̈ Fasten retaining screws 4.
̈ Reinsert cover 2 and press it in until it
engages.
̈ Fasten retaining screw 3.
Additional turn signal lamps bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Light
Truck Center.
Front sidemarker lamp bulbs
Since replacing the sidemarker lamp bulbs
is a technically highly demanding process,
we recommend you have the sidemarker
lamp bulbs replaced by an authorized
Mercedes-Benz Light Truck Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
̈ Turn the combination switch to
position M (
୴ page 147).
Tail lamp unit
̈ Open the tailgate (୴ page 122).
i
To access the tail lamp units, you have
to remove the cover in the correspond-
ing side trim panel of the cargo com-
partment.
୴୴