Filter
Top Products
368
Operation
Tires and wheels
̈ Switch on the ignition (୴ page 38).
Make sure the standard display menu
appears in the multifunction display
(
୴ page 168).
̈ Press button k or j repeatedly
until the following message appears in
the multifunction display:
̈ Press button æ.
The following message will appear in
the multifunction display:
Tire pressure now OK?
If you wish to confirm activation:
̈ Press button æ.
The following message will appear in
the multifunction display:
Run Flat Indicator
reactivated
After a certain “learning phase”, the Run
Flat Indicator checks the set pressure
values for all four tires.
If you wish to cancel activation:
̈ Press button ç.
or
̈ Wait until the message
Tire pressure now OK?
disappears.
Checking tire pressure electronically
with the Tire Pressure Monitoring
System (TPMS), (USA only)
i
The Tire Pressure Monitoring System
(TPMS) is equipped with a combination
low tire pressure/TPMS malfunction
telltale in the instrument cluster
(
୴ page 24). Depending on how the
telltale illuminates, it indicates a low
tire pressure condition or a malfunction
in the TPMS system itself:
ț If the telltale illuminates continu-
ously, one or more of your tires is
significantly underinflated. There is
no malfunction in the TPMS.
ț If the telltale flashes for 60 seconds
and then stays illuminated, the
TPMS system itself is not operating
properly.