Filter
Top Products
182
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
submenu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
button æ or ç to the
Lighting
submenu.
̈ Press button j or k repeatedly
until the message
Lamp circuit
headlamp
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
manual operation (
manual
) or daytime
running lamp mode (
constant
).
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U, the low beam
headlamps are switched on when the
engine is running.
Function Page
Setting daytime running lamp
mode (USA only)
182
Setting locator lighting 183
Setting night security
illumination
184
Setting interior lighting delayed
shut-off
185
i
This function is not available in
countries where the daytime running
lamp mode is mandatory and therefore
in a constant mode.