Filter
Top Products
176
Controls in detail
Control system
Submenus in the Settings menu
̈ Press button j.
The collection of the submenus
appears in the multifunction display.
̈ Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with button ç, scroll up
with button æ.
With the selection marker on the desired
submenu, use the j button to access
the individual functions within that sub-
menu. Once within that submenu, you can
use the j button to move to the next
function or the k button to move to the
previous function within that submenu.
The settings themselves are made with
button æ or ç.
Resetting the functions of a submenu
You can reset all the functions for each
submenu to the factory settings.
̈ Move to a function in the submenu.
̈ Press the reset button in the
instrument cluster (
୴ page 158) for
approximately 3 seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
̈ Press the reset button once more.
All functions of the submenu will reset
to factory settings.
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button a second
time.
After approximately 5 seconds, the
Settings
menu reappears in the
multifunction display (
୴ page 174).
i
For safety reasons, the function
Lamp circuit headlamp
(୴ page 182)
in the
Lighting
submenu cannot be
reset while driving.
The following message appears in the
multifunction display:
Lighting
Cannot be completely reset
to factory settings while driving