Filter
Top Products
87
Safety and Security
Occupant safety
Anchorage rings 1 are located on the
back side of the outer rear backrests and
on the floor behind the rear center seat.
1 Anchorage ring
2 Hook
̈ Fold up anchorage ring 1.
̈ Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
1 Anchorage ring
2 Hook
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Secure the child restraint and
tighten the top tether strap according to
the child restraint manufacturer’s instruc-
tions.
i
With a child seat and top tether in-
stalled in the right rear seat position
and twin roller blind installed, make
sure the top tether strap is positioned
between seat backrest and twin roller
blind.
Warning! G
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo compart-
ment is not in use. Check for secure locking
by pushing and pulling on the backrest.
i
For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated below.