Filter
Top Products
183
Controls in detail
Control system
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until you see the
Tel
menu in the mul-
tifunction display.
̈ Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take up to 30 seconds. In the
multifunction display you will see the
message
Please wait
.
When the message
Please wait
disap-
pears, the phone book has been load-
ed.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in as-
cending or descending alphabetical or-
der.
̈ Press button s.
The system dials the selected phone
number.
ț If the connection is successful, the
name of the party you called and
the duration of the call will appear
in the multifunction display.
ț If no connection is made, the con-
trol system stores the dialed num-
ber in the redial memory.
Redialing
The control system stores the most recent-
ly dialed phone numbers. This eliminates
the need to search through your entire
phone book.
̈ Press button ÿ or è repeatedly
until you see the
Tel
menu in the mul-
tifunction display.
̈ Press button s.
In the multifunction display you see the
first number in the redial memory.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
̈ Press button s.
The control system dials the selected
phone number.
i
If you press and hold button j
or k for longer than 1 second, the
system scrolls rapidly through the list
of names until you release the button
again.
Cancel the quick search mode by
pressing button t.