Filter
Top Products
181
Controls in detail
Control system
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until you see the reading that you want
to reset in the multifunction display.
̈ Press and hold the reset button in the
instrument cluster (
୴ page 151) until
the value is reset to
0
.
Calling up range (distance to empty)
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until the message
Range:
appears in
the multifunction display.
In the multifunction display you will see
the calculated range based on the cur-
rent fuel tank level.
TEL menu*
i
All statistics stored since the last en-
gine start will be reset approximately
4 hours after the SmartKey in the start-
er switch is turned to position 0 or re-
moved from the starter switch.
Resetting will not occur if you turn the
SmartKey back to position 1 or 2 with-
in this time period.
Warning! G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road and traffic condi-
tions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
୴୴