Filter
Top Products
171
Controls in detail
Power windows
̄ Power windows
Opening and closing the windows
The side windows are opened and closed
electrically. Switches for operating all the
side windows are located on the driver’s
door. The switches for the respective win-
dows are located on the front passenger
and the rear doors.
1 Switch for rear door window override
(
୴ page 78)
2 Left front window
3 Right front window
4 Right rear window
5 Left rear window
̈ Turn SmartKey in the starter switch to
position 1 or 2.
Opening the windows
̈ Press switch 2 to 5 to the resistance
point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
̈ Pull on switch 2 to 5.
The corresponding window will move
upwards until you release the switch.
Fully opening windows (Express-open)
̈ Press switch 2 to 5 past the
resistance point and release.
The corresponding window opens
completely.
Stopping windows
̈ Press or pull respective switch again.
Warning! G
When closing the windows, make sure there
is no danger of anyone being harmed by the
closing procedure.
The closing procedure can be immediately
halted by releasing the switch or by releas-
ing button ‹ on the SmartKey.
When leaving the vehicle, always remove the
SmartKey from starter switch, take it with
you, and lock your vehicle. Do not leave chil-
dren unattended in the vehicle, or with ac-
cess to an unlocked vehicle. Unsupervised
use of vehicle equipment can cause an acci-
dent and/or serious personal injury.