Filter
Top Products
137
Controls in detail
Control system
Selecting display (speed display or out-
side temperature)
̈ Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SELECT DISPLAY
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the
LIGHTING
submenu via the
SETTINGS
menu. Use the
LIGHTING
sub-
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the æ or ç button to the
LIGHTING
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
LIGHT CIRCUIT HEADLIGHT MODE
.
Function Page
Setting daytime running lamp
mode (USA only)
137
Setting locator lighting 138
Setting night security
illumination
139
Setting interior lighting delayed
shut-off
140
i
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.
୴୴