Filter
Top Products
102
Controls in detail
Seats
Installing front seat head restraint
̈ Press switch 1 upwards and hold for
about five seconds.
̈ Press the head restraint down until it
engages.
̈ Adjust head restraint to the desired
position.
Synchronizing head restraints and seat
adjustment fore and aft for front seats
If the power supply was interrupted (bat-
tery disconnected or discharged), the head
restraints and the seat adjustment fore
and aft are no longer adjusted
automatically.
The head restraints and the seat adjust-
ment fore and aft must be resynchronized:
̈ Switch on the ignition (୴ page 35).
̈ Move the seat completely forward
(
୴ page 38) and the head restraint fully
down (
୴ page 39) and hold the switch-
es for approximately one second.
Rear seat head restraints
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.