Filter
Top Products
139
Controls in detail
Control system
̈ Move the selection marker with
the æ or ç button to the
LIGHTING
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
LOCATOR LIGHTING
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch the loca-
tor lighting function
ON
or
OFF
.
̈ Turn the exterior lamp switch to
position U when exiting the vehicle
(
୴ page 110).
The locator lighting feature is
activated.
Setting night security illumination
(Headlamps delayed shut-off)
Use this function to set whether and how
long you would like the exterior lamps to
illuminate during darkness after exiting the
vehicle and all doors closed.
With the delayed shut-off feature activated
and the exterior lamp switch in
position U before the engine is turned
off, the following lamps will switch on after
you have removed the SmartKey from the
starter switch:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
ț Front fog lamps
If you do not open a door after removing
the SmartKey from the starter switch, the
lamps will switch off automatically after
approximately 60 seconds.
̈ Move the selection marker with
the æ or ç button to the
LIGHTING
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
HEADLIGHTS DELAYED SHUT-OFF
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the
desired lamp-on period.
i
You can reactivate this function within
ten minutes by opening a door.
୴୴