Filter
Top Products
132
Controls in detail
Control system
Settings menu
In the
SETTINGS...
menu there are two
functions:
ț The function
TO RESET: R BUTTON FOR
3 SEC.
, with which you can reset all the
settings to those set at the factory.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
SETTINGS
... menu is seen in
the display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 120) for approxi-
mately three seconds.
In the display you will see the request
to press the reset button again to con-
firm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button a second
time. Approximately five seconds after
pressing the reset button for the sec-
ond time, the
SETTINGS...
menu reap-
pears in the display.
For safety reasons, the following func-
tions are not reset while driving:
ț the
LIGHT CIRCUIT HEADLIGHT MODE
function in the
LIGHTING
submenu
ț the
SETTINGS KEY- DEPENDENT
func-
tion in the
CONVENIENCE
submenu