Filter
Top Products
343
Operation
Maintenance
̈ Press the è button on the multi-
function steering wheel until the stan-
dard display appears in the
multifunction display.
The maintenance service system now re-
calculates the values. You cannot call up
the service display or the service menu
during this time.
Calling up the maintenance service
data information
The maintenance service indicator shows
the maintenance service type (letters A-H)
in the multifunction display approximately
one month before the service appointment
is due in miles (distance criterion) or in
days (time criterion).
This maintenance service type is based on
the service items to be carried out. The
service items are described in the Mainte-
nance Booklet.
The service items to be carried out under
the corresponding service type can be dis-
played in the multifunction display.
Calling up the service item menu
̈ Switch on the ignition (୴ page 34).
The standard display of the control sys-
tem appears (
୴ page 153).
̈ Press button k or j on the mul-
tifunction steering wheel until the
maintenance service indicator appears
in the multifunction display.
̈ Press the reset button (୴ page 24) for
about five seconds.
The
Service menu
appears in the multi-
function display (
୴ page 153).
̈ Select the
Items
menu with the +
or - button.
̈ Press the ÿ button.
The service indicator now displays the
Items
menu.
̈ Press button è on the multifunction
steering wheel until the standard
display appears in the multifunction
display.
i
The service items to be carried out are
shown in this menu.
Please refer to the Maintenance Book-
let for a description of each service
item.