Filter
Top Products
253
Controls in detail
Loading
̈ Turn mounting element 2 to L.
̈ Insert mounting element 2 in cargo
rail 1.
̈ Turn mounting element 2 until it en-
gages in the ‹ position.
You should be able to feel the mounting
element engage in the cargo rail.
Inserting the cargo tie-down ring in the
mounting element
1 Cargo tie-down ring
2 Mounting element
̈ Turn mounting element 2 in the cargo
rail to N.
̈ Insert cargo tie-down ring 1 into
mounting element 2.
̈ Turn mounting element 2 until it en-
gages in the ‹ position.
You should be able to feel the mounting
element engage in the cargo rail.
i
You can turn the mounting element in
the cargo rail to four positions:
‹ To lock the mounting element.
N To insert or remove the cargo
tie-down ring, the belt reel or
the telescoping rod.
L To insert or remove the mount-
ing element.
S To move the mounting element
to the next engaging point.
Warning! G
The cargo tie-down rings should be subject
to equal loads. Make sure to comply with
the information provided in the loading in-
structions (
୴ page 250).