Filter
Top Products
128
Controls in detail
Seats
Placing head restraints upright
̈ Pull the head restraint forward until it
locks into position.
Head restraint height (rear outer seats)
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering:
̈ To lower the head restraint, push
release button 1 and push down on
the head restraint.
!
Make sure the head restraints engage
when placing them upright. Otherwise
their protective function cannot be as-
sured.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head
restraint supports the back of the head at
eye level. This will reduce the potential for
injury to the head and neck in the event of
an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.