Filter
Top Products
170
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Set-
tings
menu. Use the
Lighting
submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the æ or ç button to the
Light-
ing
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Lamp circuit headlamp
.
The selection marker is on the current
setting.
̈ Press æ or ç to select
manual
or
daytime running lamp (
constant
)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
୴ page 141).
Function Page
Set daytime running lamp mode
(USA only)
170
Set locator lighting 171
Ambient light level 173
Exterior lamps delayed shut-off 172
Interior lighting delayed shut-off 173