Filter
Top Products
32
Getting started
Adjusting
̈ Let go of handle 4. The seat should
make an audible click.
Backrest tilt
̈ Turn handwheel 2 forward or backward
until your arms are slightly angled
when holding the steering wheel.
Head restraint height
̈ Adjust the height of the head restraints
by pulling them upwards manually.
̈ For a lower position, press release
button 1 and push down on the head
restraints manually.
More information can be found in the
“Controls in detail” section (
୴ page 82).
Power seat*
̈ Switch on the ignition by turning the
key in the steering lock to position 2.
or
̈ Open the driver’s or passenger door.
The seat adjustment switches are located
on the outer sides of the seats.
1 Seat height
2 Seat fore and aft adjustment
3 Seat cushion tilt
4 Backrest tilt
i
When moving the seat, be sure that
there are no items in the footwell or
behind the seats. Otherwise you could
damage the seats.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.