Filter
Top Products
116
Controls in detail
Audio system
Balance
̈ Press the
AUD
key repeatedly until
BALANCE
appears in the display.
̈ Press the
L
key to move the sound to
the left speaker or the
R
key to move
the sound to the right speaker.
Centering all audio functions
̈ Push and hold down the
AUD
key.
All audio functions (bass, treble and
balance) are set to center or flat posi-
tions, and the volume is adjusted to a
pre-set level.
Radio mode
Selecting radio mode
̈ Press b button.
Selecting the band
̈ Press the key located below the de-
sired band.
The band selected is shown in the top
line of the display.
Manual tuning
̈ Press either the d or c button.
Step-by-step tuning in ascending or de-
scending order of frequency will take
place.
The first three tuning steps will take place
without muting. The radio will then be mut-
ed and high-speed tuning will take place
until the button is released.
The following tuning intervals will be
shown on the display:
Frequency ranges:
FM 87.9 - 107.9 MHz
AM 530 - 1710 kHz
WB approx. 162 MHz
FM 200 kHz
AM 10 kHz
WB Channels 1-7