Filter
Top Products
223
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Low and high beam headlamps (Halo-
gen headlamps only)
̈ Switch off the lights.
̈ Open the hood (୴ page 171).
1 Headlamp cover with locking tab
̈ Push down locking tab at top and end
of headlamp cover 1 and remove.
2 Electrical connector for low beam
headlamp bulb
3 Electrical connector for high beam
headlamp bulb
̈ Pull off electrical connector 2 or 3.
̈ Unhook clamping ring and pull out the
bulb together with clamping ring.
̈ Remove bulb.
̈ Insert new bulb so that bulb sits prop-
erly in cutouts of bulb socket.
̈ Mount clamping ring and reinstall.
̈ Plug electrical connector onto the bulb.
̈ Reinstall headlamp cover 1.
Low and high beam headlamps (Xenon*
headlamps only)
Warning! G
Do not remove the cover for the xenon head-
lamp. Because of high voltage in xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.