Filter
Top Products
104
Controls in detail
Climate control
Setting the temperature
Use temperature selectors 5
(
୴ page 102) to separately adjust the air
temperature on each side of the passenger
compartment. You should raise or lower
the temperature setting in small incre-
ments, preferably starting at 72°F (22°C).
Increasing
̈ Turn the selector 5 slightly upwards.
A red marking will be visible.
Decreasing
̈ Turn the selector 5 slightly downwards.
A blue marking will be visible.
Adjusting air volume
Use air volume control switch 9
(
୴ page 102) to adjust the air volume. The
following symbols are found on the con-
trol:
Adjusting air distribution
Use air distribution control switch 6
(
୴ page 102) to adjust the air distribution.
The following symbols are found on the
control switch:
i
If you use the standard settings for
heating or cooling the passenger com-
partment (
୴ page 108), you will rarely
need to change the temperature, air
volume or air distribution.
Symbol Function
0 No ventilation
between 0
and
Q
Ventilation without a
blower, depending on the
speed driven
between 1
and 5
Ventilation with blower
Symbol Function
cP Directs air to the windows
b Directs air into the pas-
senger compartment
d Directs air to the footwells
a Directs air to the upper
torso