Filter
Top Products
96
Controls in detail
Seats
Third row seats* Folding down single seat
1 Head restraint
2 Hook
3 Tensioner
4 Hook and loop strip
̈ Remove cargo floor plate
(
୴ page 144).
̈ Remove head restraint 1 from seat
cushion.
̈ Lift tensioner 3 upward to a horizontal
position to release tension of the belt.
̈ Disengage hook 2 while holding onto
the seat firmly with one hand.
̈ Attach belt at hook and loop strip 4 on
underside of seat.
5 Backrest release
6 Seat release
̈ Fold seat down until it locks securely in
place.
The red marking on the seat release
should 6 not be visible.
̈ Store cargo floor plates inside the
backrest (
୴ page 144).
̈ Pull backrest release 5 and unfold
backrest until it locks securely in place.
̈ Install head restraint 1 in backrest
(
୴ page 92).
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Failure to assure that seats are locked into
place could result in an increased chance of
injury in an accident.
Never place hands under seat or near any
moving parts while a seat is being adjusted.