Filter
Top Products
94
Controls in detail
Seats
Folding up the backrest
̈ Pull lock button 1 up and unfold back-
rest until it locks in place.
Make sure that the seat belt is not
caught in the seat.
̈ Check for secure locking by pulling and
pushing on the backrest.
The red backrest lock indicator at lock
button 1 is not visible in the locked po-
sition.
̈ Install head restraint (୴ page 92).
̈ Slide seat rearward to desired position
(
୴ page 93).
̈ Adjust front seats to desired position.
Manual seats (
୴ page 35) and power
seats (
୴ page 37).
Lowering the rear seat
1 Release button
2 Lever
3 Release lever
̈ Close cup holder in rear center console
(
୴ page 155).
̈ Move front seats forward. Manual seat
(
୴ page 35) or power seat (୴ page 37).
̈ Press and hold release button 1 to un-
lock lever 2.
̈ Pull lever 2 in direction of arrow.
̈ Pull release lever 3 and push down rear
seat until it locks in place.
̈ Fold down the backrest (୴ page 93).
̈ Adjust front seats to desired position.
Manual seats (
୴ page 35) and power
seats (
୴ page 37).
Folding up the rear seat
̈ Move front seats forward. Manual seat
(
୴ page 35) or power seat (୴ page 37).
̈ Pull release lever 3 and raise rear seat
until it locks in place.
Warning! G
Failure to assure that seats are locked into
place could result in an increased chance of
injury in an accident.