Filter
Top Products
101
Controls in detail
Memory function*
Activating parking position
The buttons are on the lower part of the
center console.
1 Deactivating parking position
2 Activating parking position
3 Adjustment button
̈ Switch ignition on (if not already on).
̈ Press button 2.
The passenger side exterior rear view
mirror is selected.
̈ Engage reverse gear R.
The passenger side exterior rear view
mirror moves automatically to the
stored parking position.
The exterior rear view mirror returns to its
stored driving position:
ț 10 seconds after you put the gear se-
lector lever in position D
ț immediately once you exceed a speed
of approx. 6 mph (10 km/h)
ț immediately when you press the
button 1 for driver’s side mirror
Storing parking position
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 2.
The passenger side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 3 so that you see the rear
wheel and the curb.
̈ Press memory button 2 (୴ page 99).
̈ Within three seconds, press bottom of
adjustment button 3.
The parking position is stored if the
mirror does not move.
i
If the button 1 is pressed, the automat-
ic passenger side exterior rear view
parking position is deactivated.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.
The selected position will be stored rel-
ative to the position button 1
(
୴ page 99) pressed.