Filter
Top Products
135
Controls in detail
Power windows
Opening the windows
̈ Press switch k to resistance point.
The window will move downwards until
you release the switch.
Closing the windows
̈ Press switch j to resistance point.
The window will move upwards until
you release the switch.
Fully opening the windows
̈ Press switch k past the point of re-
sistance and release.
Fully closing the windows
̈ Press switch j past the point of re-
sistance and release.
Stopping the windows
̈ Briefly press switch k or j.
!
If the side window is blocked in the up-
per area, the closing process is inter-
rupted and the window reopens
slightly.
Remove the obstruction, press switch
j past the point of resistance again
and release.
If the window still does not close
without an object having been trapped,
then hold the
j switch down. The
side window will then close without the
obstruction sensor function.
i
If the driver’s window cannot be auto-
matically closed without an object
having been trapped, press the
j
switch past the point of resistance
again within five seconds and release.
The side windows will now close with-
out the obstruction sensor function.
Warning! G
When closing the windows, make sure that
there is no danger of anyone being harmed
by the closing procedure.