Filter
Top Products
93
Controls in detail
Seats
Rear seat head restraints
Removing rear seat head restraints
̈ Pull out head restraint with both hands.
Installing rear seat head restraints
̈ Insert the head restraint and push it
down to the stop.
Ensure proper head restraint positioning,
(
୴ page 36).
Synchronizing head restraints and the
seat adjustment fore and aft
If the power supply was interrupted (bat-
tery disconnected or discharged), the head
restraints and the seat adjustment fore
and aft are no longer adjusted automatical-
ly.
The head restraints and the seat adjust-
ment fore and aft must be resynchronized:
̈ Turn key in starter switch to position 2.
̈ Move the seat completely forward
(
୴ page 35) and the head restraint fully
down (
୴ page 36) and hold the switch-
es for approximately one second.
i
The head restraint(s) should be stored
in a secure place.
Warning! G
For your protection, drive only with properly
positioned head restraints.