Filter
Top Products
47
Getting started
Driving
Windshield wipers
The combination switch is on the left of the
steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
̈ Make sure that the ignition is switched
on.
Switching on windshield wipers
̈ Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
0 Windshield wipers off
I Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Single wipe
̈ Press switch briefly in the direction of
arrow 1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
̈ Push switch in the direction of arrow 1
past the resistance point.
The windshield wipers operate with
washer fluid until the switch is re-
leased.
Information on filling up the washer reser-
voir can be found in the “Operation” sec-
tion (
୴ page 222).
i
The intermittent wiping interval de-
pends on the wetness of the wind-
shield. Wiping will not occur with a
front door open.
!
Do not leave in intermittent setting
when vehicle is taken to an automatic
car wash or during windshield cleaning.
Wipers will operate in the presence of
water sprayed on the windshield, and
wipers may be damaged as a result.
The switch should not be left in
intermittent setting as the wipers will
wipe the windshield once every time
the engine is started. Dust that accu-
mulates on the windshield might
scratch the glass when wiping occurs
on a dry windshield.