Filter
Top Products
36
Getting started
Adjusting
Seat height
̈ Press the switch up or down in the di-
rection of arrow 1.
Make sure that you have sufficient
headroom.
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow 3 until your upper legs
are lightly supported.
Backrest tilt
̈ Press the switch forward or back in di-
rection of arrow 4 until your arms are
slightly angled when holding the steer-
ing wheel.
Head restraint height
Adjust head restraint to support the back
of the head approximately at ear level.
Driver’s or front passenger seat
̈ Press the switch up and down in the di-
rection of arrow 5.
Rear seat
̈ Push down or pull up on the head re-
straint.
Head restraint tilt
̈ Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
More information on the seats can be
found in the “Controls in detail” section
(
୴ page 91).
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
The memory function can be used to
save the seat settings together with the
steering wheel and exterior mirror set-
tings (
୴ page 97).