Filter
Top Products
141
Controls in detail
Transfer case
Transfer case
More information on off-road driving can
be found in the “Operation” section
(
୴ page 203).
Gear range
Switching transfer case
The switch is located in the center console.
1 Transfer case indicator
2 Gear range indicator
Transfer case indicator 1 in the multifunc-
tion display shows the gear position of the
transfer case.
Switching from HIGH to LOW
H HIGH
Road position
L LOW
Off-road position
This position is intended for
driving off-road and step gradi-
ents.
The transmission will not up-
shift automatically to the next
higher gear range when driving
at the rpm limit.
The transfer case supports the
engine’s driving force (approx.
½ speed). Output is therefore
increased.
N Neutral
No power is transmitted from
the engine to the drive axle.
!
The shift procedure can only be per-
formed when:
ț The engine is running.
ț The selector lever for the automatic
transmission is in position N.
ț The vehicle speed does not exceed
25 mph (40 km/h).