Filter
Top Products
246
Practical hints
What to do if …
Messages in the display
The control system shows warning and
malfunction messages in the multifunction
display.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
The messages are divided into different
categories:
Selecting the malfunction memory menu in
the control system (
୴ page 118) displays
both cleared and uncleared messages.
Category Meaning
1 Highest priority messages.
Certain highest priority mes-
sages cannot be cleared.
2 and 3 Other high priority messag-
es and messages of medium
and low priority can be
cleared.
These messages can be
cleared. To clear, press:
ț button è, ÿ, j
or
k on the multi-
function steering wheel
(
୴ page 112)
ț the reset button on the
left side of the instru-
ment cluster (
୴ page 24)
The messages are then
stored in the malfunction
memory.
Warning! G
All categories of messages contain impor-
tant information which should be taken note
of and, where a malfunction is indicated, ad-
dressed as soon as possible at an autho-
rized Mercedes-Benz Light Truck Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property dam-
age or personal injury.