Filter
Top Products
289
Practical hints
Replacing wiper blades
Replacing wiper blades
Removal
̈ Fold the wiper arm forward.
1 Safety tab
2 Wiper blade
3 Wiper arm
4 Attachment link
̈ Turn wiper blade 2 at a right angle to
wiper arm 3.
̈ Press safety tab 1 of attachment link 4
down and slide wiper blade 2 from the
end of wiper arm 3.
̈ Remove wiper blade 2.
Installation
̈ Guide wiper blade 2 so that opening
goes through wiper arm 3.
̈ Press wiper blade 2 into arch of wiper
arm 3 until locking spring 1 engages in
attachment link 4.
Warning! G
For safety reasons, remove key from starter
switch before replacing a wiper blade, other-
wise the motor could suddenly turn on and
cause injury.
!
Never open the hood when the wiper
arm is folded forward.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
The wiper with air spoiler should be
mounted on the driver’s side
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Light
Truck Center.