Filter
Top Products
119
Controls in detail
Control system
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the key in the
starter switch is turned to position 0 or re-
moved from the starter switch.
Settings menu
In the
SETTINGS
menu there are two func-
tions:
ț The function
RETURN TO FACTORY SET-
TINGS
, with which you can reset all the
settings to those set at the factory.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
SETTINGS
menu is seen in the
display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset knob in the instrument
cluster (
୴ page 24) for approximately
three seconds.
In the display you will see the request
to press the reset knob again to con-
firm.
̈ Press the reset knob (୴ page 24)
again.
The functions of all the submenus will
reset to factory settings.
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see Priority 1 malfunctions
(
୴ page 246).
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset knob a second
time.