Filter
Top Products
286
Practical hints
Replacing bulbs
4 Bulb
̈ Push bulb 4 into socket, turn counter-
clockwise and remove.
̈ Insert new bulb 4 in socket, push in
and turn clockwise until it clicks in.
̈ Insert bulb socket in lamp housing 2
and reinstall the dust cover.
̈ Reinstall side marker lamp housing and
screw in securing screws.
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Securing screw
2 Lens
̈ Switch off the lights.
̈ Unscrew securing screws 1.
̈ Remove lens 2.
3 Bulb for turn signal lamp
4 Bulb for tail lamp
5 Bulb for stop lamp
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
turn clockwise until it clicks in.
̈ Reinstall lens 2 and screw in securing
screws 1.
i
Do not overtighten the securing screw.
Otherwise side marker lamp housing 2
could be damaged.
i
G55AMG:
Remove the protective grille before re-
placing bulbs.
i
Do not overtighten securing screws 1.
Otherwise lens 2 could be damaged.