Filter
Top Products
285
Practical hints
Replacing bulbs
3 Bulb socket
̈ Pull out bulb socket 3 from lamp
housing 2.
̈ Pull bulb out of bulb socket 3.
̈ Insert new bulb in bulb socket 3.
̈ Insert bulb socket 3 in lamp housing 2.
̈ Reinstall lamp housing 2 and screw in
securing screws.
Side marker lamp
The following description applies to both
the front and the rear side marker lamps.
Front side marker shown
1 Securing screw
2 Side marker lamp housing
̈ Switch off the lights.
̈ Unscrew securing screws 1.
̈ Remove side marker lamp housing 2.
3 Dust cover
̈ Remove dust cover 3.
̈ Press catch aside and pull out bulb
socket from side marker lamp
housing 2.
i
Do not overtighten the securing
screws. Otherwise turn signal lamp
housing 2 could be damaged.