Filter
Top Products
278
Practical hints
Brush guard*
Lowering and raising brush guard
1 Lock and unlocking handle
2 Quick lock
3 Lock
4 End stop joint
Lowering
̈ While holding brush guard firmly, open
quick lock 2 using lock and unlocking
handle 1.
̈ Gently lower brush guard until it
reaches its fully lowered position.
Raising and securing
̈ Flip up brush guard until it contacts end
stop joint 4.
Quick lock stop pin 2 must engage the
cross slot recess in lock 3.
̈ Now turn quick lock 2 so that quick
lock is making contact with end stop
joint 4.
̈ Lock quick lock 2 on both sides of
brush guard using lock and unlocking
handle 1.
!
Make sure that both quick stop pins 2
are seated fully in lock 3.