Filter
Top Products
10
Getting started
Activation
Insert the map disc into the unit to start the Mobile Navigation System.
Note
●
The map disc cannot be inserted or ejected while the ignition switch is in the OFF position.
●
Remember that the battery can run down if the ignition switch is kept in the ON or ACC
position for a long time while the engine not running.
1
Turn the ignition switch to
the ON position and press
to open the display.
2
Insert the map disc
with the printed side
facing up.
■
Map Disc
●
Refer to “Handling and Care of Map Discs” to know how to handle a map
disc (
page 55).
Cautions
Note
●
This display angle can be adjusted by pressing
.
When the is
pressed, the display
angle changes in
stages.
●
Press to close the display.
TILT
TILT
OPEN
OPEN
Note
●
The main unit is located in the glove box compartment.
●
Condensation may form on the optical lens or the map
disc inside the unit when the temperature in the vehicle
increases in a short time such as when heating the car
on a cold day. This condensation may cause
malfunctions. If so, unload the map disc and do not
operate the unit for approximately 1 hour. Wipe the
condensation off the map disc with a soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorized Mazda Dealer.
[CAUTION] screen
Navi_EA.book Page 10 Monday, March 28, 2005 4:13 PM