Filter
Top Products
Black plate (104,1)
qTire Chains
Check local regulations before using tire
chains.
CAUTION
l
Chains may scratch or chip
aluminum wheels. Install tire chains
on steel wheels only.
l
Chains may affect handling.
l
Don't go faster than 50 km/h (30
mph) or the chain manufacturer's
recommended limit, whichever is
lower.
l
Drive carefully and avoid bumps,
holes, and sharp turns.
l
Avoid locked-wheel braking.
l
Don't use chains on a temporary
spare tire; it may result in damage to
the vehicle and to the tire.
l
Don't use chains on roads that are
free of snow or ice. The tires and
chains could be damaged.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system
may not function correctly when using
tire chains.
Install the chains on the front tires.
Don't use chains on the rear tires.
Use only SAE Class “S” chains, and make
sure they fit.
Installing the chains
1. Remove the wheel covers, or the chain
bands will scratch them.
2. Secure the chains on the front tires as
tightly as possible. Always follow the
chain manufacturer's instructions.
3. Retighten the chains after driving 1/2
―1 km (1/4―1/2 mile).
4-10
Before DrivingYourMazda
Driving Tips
Mazda5_8U38-EA-05D_Edition1 Page104
Monday, March 28 2005 2:4 PM
Form No.8U38-EA-05D