Filter
Top Products
Three Timer circuits will function as follows:
First Timer Circuit
1. 50 seconds after the car jacking mode has been activated, the siren will begin to sound for 15
seconds.
2. During the 15 second activation period, you will be alerted to push the valet switch once to
turn off the car jacking feature.
3. If by now the valet switch has not been pushed, it will enter the second timer circuit.
Second Timer Circuit
65 seconds after the system has been triggered, the siren starts sounding and the parking lights
start flashing.
Third Timer Circuit
90 seconds after the security system has been triggered:
1. The vehicles siren is still sounding, parking light are flashing
2. The starter disable mode will activate to prevent the vehicle from starting
3. It will remain active until the vehicles battery power is exhausted
Turn the ignition switch from OFF to ON and within 10 seconds, push the valet switch. The siren
will stop sounding and the security system is now disarmed.
12
Anti-Car Jacking
(continued)
Trigger the Anti-Car Jacking Mode
Override the System to Turn Off Anti-Car Jacking
System Trigger Check
Status Checking (LCD Transmitter Only)
When you want to check the security systems present status through the transmitter LCD, press the
transmitter “SET” button twice, within three seconds press the button. The security system
responds with one melody sound and the LCD screen should be illuminated.
Note: If there is no response from the LCD transmitter, you may be out of range to receive the
signal.
System Check
Press the transmitter “SET” button first, within three seconds press the
button. The transmitter will respond with one melody sound and all
trigger records will immediately displayed on the transmitter LCD screen.
HOOD
TRUNK
ARM
IGN