Filter
Top Products
46
5. The POI information screen appears. If you wanted to navigate
there, you could press Enter, since the Go To Waypoint command is
highlighted. But we just want to see it on the map, so press ↓ to
FIND ON
MAP|ENT.
6. The unit's map appears, with the cursor crosshairss highlighting the
restaurant's POI symbol. A pop-up data box shows the POI's name, dis-
tance and bearing. A data box at the bottom of the screen continues to
display the location's latitude and longitude.
Map screen showing Finding Waypoint,
the result of a restaurant search.
7. To clear the search and return to the last page displayed, press EXIT
repeatedly. (Before you completely exited out of the Search menus, you
could have gone looking for another place.)
NOTE:
Search works from mapping and POI data loaded in the unit. If you
do not have a high-detailed custom map (containing POI data) for
the area you are searching loaded on the MMC, you may not find
anything.
Set a Waypoint
A waypoint is simply an electronic address, based on the latitude and
longitude of a position on the earth. A waypoint represents a location or
destination that can be stored in memory, then recalled later for navi-
gational use.
You can create a waypoint at the cursor position on the map or at your
current position while you are navigating. A waypoint may be created
at any location by manually entering the position's latitude and longi-
tude.