Filter
Top Products
103
2. Select
SET LOCAL TIME and press ENT.
3. Highlight the
CONFIGURE DST button and press ENT. From the Country
menu, select the country with DST rules that match your region.
4. Press
EXIT repeatedly to return to the map display.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, its not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS.
To turn on/off the WAAS Alarm:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to SHOW WAAS ALARM.
2. With the option highlighted, press
ENT to check it (turn on) or un-
check it (turn off) the WAAS Alarm.
3. Press
EXIT|EXIT to return to the map display.
To Require WAAS:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to REQUIRE WAAS.
2. With the option highlighted, press
ENT to check it (turn on) or un-
check it (turn off).
3. Press
EXIT|EXIT to return to the map display.
Software Version Information
From time to time, Lowrance updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.lowrance.com.
These upgrades make the unit perform better and/or introduce a new
feature or function. You can find out what software version is running
in your unit by using the Software Information command.
To access Software Information:
1. Press
MENU|MENU, highlight SYSTEM SETUP and press ENT.
2. Select SOFTWARE INFO and press ENT. Software information will be dis-
played on the screen.
3. Press EXIT repeatedly to return to the map display.