Filter
Top Products
97
Data Viewer (left). Navigation category expanded with Bearing and
Distance selected (center). Bearing and Distance displayed on Overlay
Data Shown menu (right).
To remove overlaid data:
1. While on the Page that shows the item or items you want to remove,
press
MENU|↓ to OVERLAY DATA|ENT.
2. You will see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
ENT|ENT to re-
move the data. To remove another item, highlight the item and press
ENT|ENT.
3. When you have finished removing Overlay Data, press
EXIT to return
to the map page display.
NOTE:
You also can remove data directly from the Data Viewer menu by
repeating the steps used to add overlay data. Highlight the overlay
data currently displayed, then press
ENT, unchecking the data op-
tion, which will remove it from the display..
Overlay Data Shown menu with Date selected (left). Remove high-
lighted on Data Information menu (center). Date has been removed
from the Overlay Data Shown menu (right).