173
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT, which calls up the
Find by Name menu. There are two highway search options
: A. You can
spell out the highway name in the top selection box. Press ↑ or ↓ to
change the first
letter, then press → to move the cursor to the next
letter and repeat
until the name is correct, then press ENT|ENT. B. Or
jump down to the
lower selection list by pressing ENT, then press ↓ or ↑
to select a highway from the list, then press ENT.
Find By Name menu.
3. Once you have selected a highway name you can then select an exit.
Press
↓ to switch to the Exit List, then press ↓ or ↑ until you highlight
the exit, then press
ENT.