Filter
Top Products
58
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the selec-
tion box, use
↓ or ↑ to highlight the file, then press ENT to accept the
selection. Next, press
↓ to LOAD DATA|ENT. The unit will display a comple-
tion message when the data transfer is finished. To return to the Page
view, press
EXIT repeatedly.
These figures show the menu sequence for loading a GPS Data File
from a MMC into the GlobalMap's memory.
Save GPS Data to Hard Drive
If you do not have a MMC or SD card, you can save any GPS data
(trails, routes, waypoints and icons) to the unit's hard drive. To do this
from the Map Page:
1. Press
MENU| MENU| ↓ to SYSTEM SETUP
2. Press
→ to TRANSFER MY DATA|ENT| ENT. A dialog box will appear on
screen. In this dialog box, you can choose whether to save the data to the
unit's hard drive or to a MMC card.
Figure 3.
Figure 2.
Figure 1.
Figure 4.