Filter
Top Products
121
Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT re-
peatedly.
5.
If you're looking by name, there are two options: A. You can spell out the
name in the top selection box. Press
↑ or ↓ to change the first letter, then
press
→ to move the cursor to the next letter and repeat until the name is
correct, then press
ENT|ENT. B. Or you can jump down to the lower selec-
tion list by pressing
ENT, then press ↓ or ↑ to select a waypoint from the
list and press
ENT. The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint (right) is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press ENT (Go To Waypoint com-
mand is already highlighted.). The unit will show navigation in-
formation to the waypoint.
B. T
o find the waypoint, press ↓ to FIND ON MAP|ENT. The Map Page
appears with the cursor centered on the found waypoint.
To clear these menus and return to the previous page, press
EXIT re-
peatedly.