Filter
Top Products
25
To pass all connectors through the 1" hole, first pass the antenna con-
nector up through the hole from under the dash. Next, pass the power
cable's bare-wire end down though the hole from the top.
If you wish, you can fill in the hole around the cables with a good ma-
rine caulking compound. No matter what type of installation you pre-
fer, be sure to leave enough slack in the cables to allow tilting or swiv-
eling the unit.
Attach the unit to the gimbal bracket using the supplied gimbal knobs
and washers. Attach the cables and the unit is ready to use.
In-Dash Installation
You can mount the GlobalMap 7200 and GlobalMap 7300 in the dash
with an optional FM-3 In-Dash Adapter Kit. The kit includes mounting
hardware and a template for cutting the hole.
In-dash mounting template for the GlobalMap 7200 and GlobalMap
7300, showing dimensions. The figure above is not printed to scale.
Portable Installation
Like many Lowrance products, the GlobalMap 7200 and GlobalMap
7300 are capable of portable operation by using an optional portable
power pack. The power pack and the magnet-equipped antenna module
expand the uses for your GPS unit. The portable power pack makes it