Filter
Top Products
19
ICONS
The map has 42 symbols or “icons” available that can be placed any-
where on the screen. They can be used to mark fishing or hunting loca-
tions, landmarks, boat ramps, and virtually any point of interest. An icon
can be placed at your present position or at the cursor’s location.
To place an icon at your present
position, simply press the ENT
key while a mapping screen is on.
The screen shown at right ap-
pears. Use the arrow keys to
highlight the desired icon. Now
press the ENT key again. The
mapping screen reappears with
the icon showing at the position
you were at when the ENT key
was pressed. On the screens
shown below, the shipwreck icon was placed.
To place an icon at the cursor’s
position, first use the arrow keys
to move the cursor to the loca-
tion that you wish to place the
icon. Next, press the ENT key.
Now highlight an icon using the
arrow keys. While it’s highlighted,
press the ENT key. The map re-
appears with the icon placed at
the cursor crosshairs. Press the
EXIT key to erase the cursor.
Icons can be erased from the
plotter individually, all of a spe-
cific type, or all at once. To make
changes to the icons, press the
MENU key, then select “Delete
My Icons”. The screen shown at
right appears.
The “Delete All Icons” selection
erases all of the icons from
memory. Use this only if you want
to erase all icons that have been
placed on all map screens.